How to Maintain Magnetic Filters?

Magnetic filters are widely used in our life, as one of the filters, magnetic filters are widely used in the food industry, medicine, cosmetics, fine chemicals, and other industries. A magnetic filter is a small piece of equipment that can remove solids in liquids and protect the normal work and operation of other equipment, so how should we preserve and maintain this magnetic filter?

1. Introduction of magnetic filters

The magnetic filter is an indispensable device on the pipeline of the conveying medium. It is usually installed at the reduction valve, decompression valve, water level control valve, and other equipment of the filter inlet end. The magnetic filter for water is widespread. After through the filter cartridge with a certain specification strainer, the impurities are blocked. When need to clean, just need to take the removable cartridge out and reload after treatment, so the use and maintenance are extremely convenient.

2. Working principle of magnetic filters

The magnetic filters use a strong magnetic element to make multiple magnetic rods inserted into the medium. And then it adsorbs the ferromagnetic particles in the medium on the surface of the magnetic rod, removes the ferromagnetic particles in the medium, and achieves the purpose of protecting the magnetic pump.

3. Methods of preserving and maintaining magnetic filters

(1) The center stage of the filter is the filter core. The filter core is composed of a filter frame and a stainless steel mesh. The stainless steel mesh is a vulnerable part and needs special protection.

(2) When the filter has been working for some time, certain impurities are deposited in the filter core. At this time, the pressure will increase and the flow rate will decrease, the impurities in the filter core must be removed in time.

(3) When cleaning impurities, pay special attention to the stainless steel mesh on the filter core of the magnetic filter not to be deformed or damaged. Otherwise, the purity of the filtered medium after re-loading would not meet the design requirements, and the compressors, pumps, meters, and other equipment would be damaged.

(4) If the stainless steel mesh is found to be deformed or damaged, it needs to be replaced immediately.

The above is the introduction of the magnetic filter and maintenance methods. After reading the introduction of Liyuan, do you know about this kind of magnetic filter? Do you know how to preserve and maintain it? Filters play a very important role in our life, so regular maintenance is essential.